Kinesik Ecoglo S2-E30 Photoluminescent Cast in Place Stair Nosing with Yellow Anti-Slip Strip 2.2″ (Sold in Linear Feet)

The S2-N30 Non-Slip Anodized Stair Nosings provide step edge colour contrast, long-lasting anti-slip protection and beautiful appearance.

• High visibility in dark or light conditions. Brightness : ASTM E2073-02, Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings / DIN 67510 Part 1, Phosphorescent Pigments and Products: Measurement and identification by the manufacturer / ISO 17398:2004 Clause 7.11, Safety Colours and Safety Signs – Classification, Performance and Durability of Safety Signs
• High durability indoors and outdoors. UV Stability : ASTM G155-04 Cycle 1 2000hrs, Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Nonmetallic Materials / Salt Spray Resistance: ASTM B117-97 500hrs, Standard Practice for Operating Salt Spray (Fog) Apparatus / Freeze-Thaw Resistance: ASTM C1026-87(1996), Standard Test Method for Measuring the Resistance of Ceramic Tile to Freeze-Thaw Cycling
• Reduces Slips. Slip Resistance : UL410, Standard for Slip Resistance for Floor Surface Materials / AS/NZS 4586-1999, Slip Resistance Classification of New Pedestrian Surface Materials
• Hard Wearing. Abrasion Resistance : ASTM D1242-95a, Standard Test Methods for Resistance of Plastic Materials to Abrasion / ASTM F510-93(2004), Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method / JIS H8682-1:1999, Test methods for abrasion resistance of anodic oxide coatings on aluminium and aluminium alloys – Wheel wear test
• Easy Cleaning. Washability : ASTM D4828-94(2003), Standard Test Methods for Practical Washability of Organic Coatings
• No radioactivity or toxicity. Radioactivity : ASTM D3648-2004, Standard Practices for the Measurement of Radioactivity / Toxicity: Bombardier SMP 800-C (2000), Toxic Gas Generation Test
• Does not burn. Flammability : ASTM E162-02, Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source / ASTM D635-03, Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position / FAA AC 23.2 Paragraph 4.b, Horizontal Burn Test
• Available in cut to length sizes. (Tolerance +or- 1/8”) Standard lengths of 8′